For non or poorly converging implicit solutions, the parameter D3ITCTL parameter in *CONTROL_IMPLICIT_SOLUTION may come handy to isolate regions of interest. When D3ITCTL is non-zero, LS-DYNA outputs the model information at each Iterative step into a binary file named D3ITER which is in the same format as D3PLOT. The number of steps for which the [...]
Archive for September 21st, 2006
Identifying Problem Areas for Poorly Converging Implicit Solutions
Published by September 21st, 2006 in LS-DYNA Bytes and LS-DYNA Implicit. 2 CommentsMapping of Deformed Nodal Coordinates for SubSystem/Component Analysis
Published by September 21st, 2006 in LS-DYNA Output. 6 CommentsSeveral analyses sometimes requires the mapping of nodal positions (coordinates) from a previous run for use in current run. For single component this is a rather easy task since it just involves writing a DYNAIN file for part(s) of interest using *INTEFACE_SPRINGBACK_LSDYNA keyword which would consist of final deformed nodal coordinates and element history variables. [...]

Recent Comments