Running LS-DYNA jobs (either interactively or as a batch job) can be interrupted with sense-switch controls by creating files “d3kil”, “D3KIL” and “switch” in the running directory. This works as expetec without the use of any “jobid” definition. However, when using a jobid parameter either using *KEYWORD_ID or in the command line (jobid=jobname), LS-DYNA expects this jobid string to appear in the fiels such as “jobid.d3kil” or “jobid.D3KIL” or “jobid.switch” files in the running directory of the master node.
Categories
- d3view (6)
- d3View Features (16)
- LS-DYNA Airbags (2)
- LS-DYNA ALE (1)
- LS-DYNA Bytes (97)
- LS-DYNA Connections (3)
- LS-DYNA Contact (21)
- LS-DYNA Curves (3)
- LS-DYNA Elements (9)
- LS-DYNA Implicit (7)
- LS-DYNA Materials (10)
- LS-DYNA MPP (4)
- LS-DYNA Output (10)
- LS-DYNA SPH (3)
Recent Comments
Recent Posts
- Multi Solver Run in LS-OPT
- Tolerance used for Tying Slave Nodes in TIED contacts
- Packing LS-DYNA Input Files for Easy Distribution (v1.1a)
- Damage modeling using GURSON
- Characterizing plasticity material models using data from test
- Optimizing monotonically increasing load curves
- Packing LS-DYNA Input Files
- Termination due to Added Mass
- 971 Release 3.2 is Now Available
- 405
Hosting Sponsored by:
0 Responses to “”